Mike's Custom Deck Gates LLC /[We Ship Throughout the Continental U.S. & Canada / 845.553.4283]

PO Box 189, Tomkins Cove, NY (Rockland County) 10986

AVAILABLE COLORS (any combination for Frame & Spindles):

  • Vintage Lantern
  • Fire Pit
  • Gravel Path
  • Tree House
  • Classic White
  • Classic White w/ Colonial Spindles
  • Rope Swing


Also available with an optional Matching Top Rail!

SOLD OUT - NO LONGER AVAILABLE!

PRODUCT LINE -

COLORS:

  • Woodland Brown
  • Saddle
  • Winchester Gray
  • Madeira

AVAILABLE COLORS (any combination for Rails/Frame & Spindles):

  • Black (formerly Classic Black)
  • White (formerly Coastal White)
  • Mountain Cedar
  • Slate Gray (formerly RiverRock)
  • Brownstone (formerly SandRidge)
  • Kona (formerly Traditional Walnut)

We ship via FedEx or UPS -

AVAILABLE COLORS (any combination for Rails/Frame & Spindles):

  • White
  • Brown
  • Bronze
  • Black

Gates are made of ALL #1 Grade Pressure treated wood (finest available).  Spindles are cut from 2 X 4 stock (2 X 2 material is NOT used) and joined into 2 X 4 rails utilizing a precision dado joint.  All edges are slightly rounded over.  These gates are produced to the same demanding standards as all of our gates and are beautiful and strong; made to last!


Special Note: You can also stain our P.T. gates to match your specific deck/railing color using a solid stain.  Staining will provide a long lasting maintenance free finish.  We will provide you with all of the info and details necessary for you to get the best results (including recommending the best products).  Contact Us!

CLEAR CEDAR GATES

Visit our Order Form Page to order now.  If you do not see what you want or if you have any questions, please Contact Us -or- call us at 845-553-4283.

quality oil-based primer and then painted using Sherwin-Williams Duration paint (their best).  After some research and development, we have come up with colors that perfectly match the Transcend & TimberTech color finishes!  We also provide you with a small jar of touch-up paint; additional paint is available to perfectly match your specific gate.


FAQ: Why do we use Trex Accents material for the frame?  See the Why Us Page for the answer.

Gates are made of ALL Clear High Grade Cedar lumber.  Spindles are cut from 2 X 4 stock (2 X 2 material is NOT used) and joined into 2 X 4 rails utilizing a precision dado joint.  All edges are slightly rounded over.  These gates are produced to the same demanding standards as all of our gates and are beautiful and strong; made to last! 


Special Note: You can also stain our P.T. gates to match your specific deck/railing color using a solid stain.  Staining will provide a long lasting maintenance free finish.  We will provide you with all of the info and details necessary for you to get the best results (including recommending the best products).  Contact Us!

SOLD OUT - NO LONGER AVAILABLE!

Feeney Cable Rail System Gates.  We build a custom frame to perfectly match your material and then the cable system can easily be added!  We have sold many recently and they are getting more popular for certain applications (especially where a less obstructed view is desired).  Click Here to Learn More!

Why buy an ordinary deck gate made of pressure treated or cedar wood, when you can get a custom handmade Trex, TimberTech, Fiberon or Azek material gate for a reasonable additional cost?  After all, you have already invested thousands of dollars into your beautiful composite deck.  This relatively small investment will payoff in years to come with a beautiful gate that will perfectly match your composite deck and/or railing (and give you all of the same benefits of your composite material deck)!

We have sold over 750 gates during the past five years alone throughout the continental U.S.!!  Our gate frames (only) are painted; the spindles are the actual identical spindles that you purchased for your deck railing!  If you have concerns or questions about the painted Frames, please call us at 845-553-4283 and speak to Mike directly (before making your purchase decision)!  There are very specific and important reasons for the paint process.  Our gates are the strongest, most reliable, best looking and cost effective available.  Our gates sell for $300 less (on average) than comparable ones sold online by our one competitor!

ALL of our gates feature our own exclusive design that results in a no sag beautiful looking gate.  We have developed a unique, proprietary design that is built to last!  Our gates are built to exacting craftsman standards employing professionally cut joints and steel reinforced corners.  In addition, the corners are reinforced using biscuits and water-proof (two-part epoxy) glue.

Trex, TimberTech, Azek, Fiberon and Veranda gate frames are painted (see below for more info/details) that will maintain their finish; we use an oil-based primer and only Sherwin-Williams Duration paint (their best).  ALL gate frames are made from composite material (no wood is used)!  See the Notes at the bottom of the Order Form Page for more info.

Our patent-pending custom designs combine variations of dados, rabbets, mortise & tenons and perfect miter cuts (along with high quality state-of-the-art fasteners) resulting in a gate that not only looks great but will last for many many years to come!

Since we offer spindles/balusters made from the current composite product lines, your gate will blend in perfectly to match your particular railing and/or deck material.

For those of you that have a pressure treated or cedar deck/railing, we also offer gates made of #1 Grade pressure treated and clear cedar wood.  These gates are made to the same exacting standards as our Trex gates, but cost much less due to the cost of the material (and less time to produce).  The fastener parts and the labor involved are of the same quality on all of our gates.  Our prices for these Gates are actually quite reasonable because (as you probably know) composite material is very expensive.


You can order both Standard and Non-Standard size (including swimming pool) gates on our Order Form Page.

Building a gate to match the Trex Transcend, Select and TimberTech rail/frame proved to be a daunting challenge!  The spindle for the rail system is hollow which creates a lot of difficulty in attaching them to the rails in a manner that met our strict standards for strength and beauty.  More than a year of research & development (including much trial & error) was required to produce a viable, strong, beautiful and acceptable gate!


The frame is actually made of Trex material. The top and bottom rails are shaped and cut (forming a mortise & tenon joint) to accept the spindles.  Corners are mitered (45 degree angle) and a double biscuit joint along with a 2-part epoxy is used for strength.  Everything is screwed together using high quality 3" colored screws.  In addition, the frame is attached to the spindles using special high-tech screws that are countersunk (the hole is plugged with a matching color composite material plug.

The composite frame material is first primed using a high

AVAILABLE COLORS (any combination for Rails/Frame & Spindles):

  • White
  • Brownstone
  • Kona
  • Black
  • Slate Gray